500+ Material Grades Ready to Machine
From aerospace-grade Titanium and Inconel to medical PEEK and engineering plastics. Match strength, weight, corrosion, temperature, finish, and budget requirements before RFQ.
Proven Expertise Across High-Difficulty Materials
We transfer proven expertise from turn-mill compound machining and stainless steel mirror finishing to a wide range of high-difficulty materials. For orders from 1,000 to 5,000 pieces, we provide the most cost-effective one-clamp mass production solution.
Six Metal Categories
Aluminum
6061 / 7075 / 5052 / MIC-6 / 2024 / 6063
Lightweight structural parts, housings, heat sinks. Excellent strength-to-weight ratio.
Stainless Steel
303 / 304 / 316L / 17-4PH / 15-5PH
Medical, food-grade, corrosion-resistant. Mirror finish Ra 0.05μm.
Carbon & Alloy Steel
1018 / 1045 / 4130 / 4140 / 4340 / 8620
Gears, shafts, tooling, load-bearing components.
Brass & Copper
C360 / H59 / C110 / C101 / Beryllium Cu
Electrical contacts, fittings, RF and thermal parts.
Titanium
Grade 2 / Grade 5 (Ti-6Al-4V)
Aerospace, medical, high strength-to-weight parts.
Tool Steel
D2 / H13 / S7 / O1 / P20
Mold inserts, guide pins, wear blocks, forming blocks.
High-Performance Plastic Materials
PEEK
High-performance, 260°C temp resistance, medical/aerospace grade.
POM (Delrin)
Excellent wear resistance and dimensional stability. Gears, bearings.
Nylon (PA)
High strength and toughness. Transmission parts, structural components.
PTFE
Ultra-low friction, chemical resistant. Seals, insulators.
PEI (Ultem)
High strength, high temperature. Aerospace/medical.
PC / ABS / PP / PMMA
General engineering plastics for various applications.
High-Performance Alloys for Extreme Environments
Inconel 625 / 718
Nickel-chromium alloy. High temp, corrosion resistant. Aerospace/chemical.
Hastelloy
Extreme corrosion resistance. Chemical/oil & gas.
Stellite / Tungsten / Molybdenum
Extreme wear and temperature applications.
Compare Key Material Properties
| Material | Density (g/cm³) | Tensile (MPa) | Corrosion | Machinability | Typical Use |
|---|---|---|---|---|---|
| Aluminum 6061 | 2.70 | 310 | Good | Excellent | Structures/Housings |
| Aluminum 7075 | 2.81 | 572 | Fair | Good | Aerospace |
| Stainless 316L | 7.99 | 580 | Excellent | Fair | Medical/Chemical |
| Stainless 17-4PH | 7.80 | 1034 | Good | Fair | Aerospace/Valves |
| Titanium Gr.5 | 4.43 | 950 | Excellent | Difficult | Aerospace/Medical |
| Brass C360 | 8.50 | 400 | Good | Excellent | Electrical/Decorative |
| PEEK | 1.32 | 100 | Excellent | Good | Medical/Aerospace |
| POM | 1.41 | 70 | Excellent | Excellent | Gears/Bearings |
Not Sure Which Material to Choose?
Our engineers will help you select the right material for your project.
Get Material Advice