From Semiconductor Cleanrooms to Robot Joints
We supply tight-tolerance CNC machined parts to the world's most demanding industries. With expertise in stainless steel mirror finishing and turn-mill compound machining, we solve complex manufacturing challenges.
14 Industries, One Manufacturing Partner
Robotics & Dexterous Hands
Joint housings, finger joints, grippers. ±0.005mm tolerance. Al 7075/Ti TC4/SS 17-4PH.
UAV & Drone
Motor mounts, gimbals, lightweight structures. Al 7075-T6/Ti TC4/Mg AZ31B.
Semiconductor
Vacuum chambers, wafer fixtures, gas distribution plates. Ultra-clean, high-flatness.
Medical Devices
Surgical instruments, housings, Ti implants. ISO 13485-aligned. SS 316L/Ti Gr5/PEEK.
Aerospace
Lightweight brackets, connectors, structural parts. Al 7075/Ti-6Al-4V/Inconel.
Automotive & NEV
Motor parts, heat sinks, flanges, bushings. Al/SS/Copper/Carbon Steel.
Precision Transmission
Gears, splines, couplings. DIN 867/AGMA. Alloy Steel/Bearing Steel.
Optical & Instrumentation
Lens barrels, mounts, precision bases. Invar/Al/SS/Brass.
Industrial Automation
Linear modules, servo mounts, positioning blocks. Al 6061/7075/SS 303.
Fluid Control & Valves
Valve bodies, spools, manifolds. Seal & finish consistency. SS 316L/Brass/Al.
Electronics & Communication
Housings, heat sinks, EMI shields, connectors. Al/SS/Brass/Copper.
Energy Storage & Power
Battery boxes, bus bars, thermal baseplates. Al/Copper/SS.
Tooling & Fixtures
Mold inserts, guide pins, wear blocks. D2/H13/P20/S7.
Consumer Electronics
Coffee machine parts, lighting, smart home. Al/SS/Brass/POM/PC.
From Turn-Mill Compound & Mirror Finishing to Every High-Difficulty Material
We transfer the proven expertise from turn-mill compound machining and stainless steel mirror finishing to a wide range of high-difficulty materials. Whether it is stainless steel valves, aluminum enclosures, or PEEK medical parts — every material receives the same precision commitment backed by years of process development.
Precision Control for Tight-Tolerance & Easy-to-Machine Materials
Plastic is easy to deform. But if you can achieve high precision on stainless steel, you can definitely control tolerances on plastics. LC Manufacturing excels at two categories of precision material control.
Hard-to-Machine Materials
Stainless steel, titanium, superalloys, PEEK — controlled by process expertise and optimized cutting parameters.
- Stainless Steel Mirror Finishing (Ra 0.2)
- Titanium & Inconel High-Temp Control
- PEEK & PTFE Precision Machining
Easy-to-Deform Materials
Engineering plastics, thin-wall aluminum — controlled by specialized fixturing and stress-relief strategies.
- POM / Delrin ±0.01mm Tolerance
- Thin-Wall Aluminum Anti-Deformation
- Nylon & UHMW-PE Warp Prevention
Engineering Metals
6 major metal categories covering the full spectrum of engineering metals — structural steels, stainless grades, aluminum alloys, copper, titanium, and specialty materials.
Aluminum Alloys
6061 / 7075 / 5052 / MIC-6 / 2024 / 6063
Lightweight structural parts, housings, heat sinks. Excellent strength-to-weight ratio, corrosion resistance, and machinability.
Stainless Steel
303 / 304 / 316L / 17-4PH / 15-5PH
Medical, food-grade, corrosion-resistant hardware. Mirror-finish capable with Ra 0.2 surface. Excellent corrosion resistance and hygiene properties.
Carbon Steel & Alloy Steel
1018 / 1045 / 4130 / 4140 / 4340 / 8620
Gears, shafts, tooling, load-bearing components. High strength, excellent wear resistance, and cost-effective heat-treat options. 4140 (42CrMo) is the industry workhorse for shafts, gears, and dies.
Brass & Copper
C360 / H59 / C260 / C110 / C101 / Beryllium Copper
Electrical contacts, fittings, RF and thermal parts. Excellent electrical and thermal conductivity, corrosion resistance, and the best machinability rating of all metals.
Titanium Alloys
Grade 2 (CP-Ti) / Grade 5 (Ti-6Al-4V / TC4)
Aerospace, medical, high strength-to-weight parts. Exceptional strength-to-weight ratio, biocompatibility, and corrosion resistance. Grade 2 for chemical and medical; Grade 5 for aerospace structures.
Tool Steel & Mold Steel
D2 / H13 / S7 / O1 / P20 / S136 / NAK80 / M2
Mold inserts, guide pins and bushings, wear blocks, forming blocks. High hardness, wear resistance, and thermal stability. D2 for cold work; H13 for hot work molds.
Engineering Plastics
Supporting metal-part machining with precision plastic capabilities. We machine all major engineering and high-performance polymers — from general-purpose ABS to aerospace-grade PEEK. Plastics deform easily — LC controls them with stainless-grade precision.
PEEK
Standard / GF30 / CF30 / ESD PEEK
Top-performing engineering thermoplastic. Continuous service to 250°C, excellent chemical resistance, biocompatible. Used in medical implants, semiconductor wafer carriers, and aerospace structural parts.
POM / Acetal / Delrin
Natural / Black / Glass-Filled / ESD Grade
Low friction, high dimensional stability, and excellent machinability. The go-to plastic for precision mechanical parts — gears, bushings, sliders, and automation components.
PTFE / Teflon
Virgin PTFE / GF25 / Carbon-Filled
Chemically inert to virtually all substances, with the lowest friction coefficient of any solid plastic. Ideal for seals, gaskets, valve seats, and chemical equipment requiring zero reactivity.
Nylon / PA
PA6 / PA66 / MC Nylon (Cast) / MoS2/GF-Filled
Good wear resistance and toughness for structural and moving parts. MC Nylon offers improved dimensional stability. Used for gears, pulleys, wear strips, and conveyor guides.
PC / ABS / PMMA
Polycarbonate / ABS / Acrylic (PMMA)
PC offers 200x impact strength of glass with optical clarity. ABS is cost-effective and electroplateable. PMMA delivers 92% light transmission with mirror-finish machinability.
PEI (Ultem) / PPS / PP / PVC / HDPE
Ultem 1010 / Ultem 9085 / PPS GF40 / PP / HDPE / PVC
PEI (Ultem) is steam-autoclavable to 180°C for medical and aviation. PPS offers 220°C continuous service. PP/HDPE/PVC for chemical, food-safe, and water treatment applications.
Exotic & High-Performance Alloys
For the most demanding environments — extreme temperature, corrosion, wear, and strength requirements. These materials demand specialized tooling, cutting parameters, and process control.
Nickel-Based Alloys
Inconel 625 / Inconel 718 / Hastelloy C-276 / Monel 400
Outstanding corrosion and high-temperature strength. Inconel 625 for cryogenic and marine; Inconel 718 for aerospace turbines; Hastelloy C-276 for aggressive chemical environments; Monel 400 for seawater and brine.
Cobalt Alloys & Stellite
CoCr / Stellite 6
Medical implants, turbine blades, wear-resistant tooling. Excellent high-temperature strength and wear resistance. Stellite maintains hardness up to 600°C.
Tungsten & Molybdenum
Pure Tungsten (W) / W-Ni-Fe / W-Cu / Pure Mo / TZM
Highest melting point metals. Tungsten (3422°C) for radiation shielding, counterweights, and high-temp furnace parts. Molybdenum for semiconductor sputtering targets and high-temp fixtures.
Material Selection Guide
Compare key parameters across material families to find the right grade for your application. Our engineers can help match material properties to your design requirements.
| Material | Density (g/cm³) | Tensile (MPa) | Corrosion Resistance | Machinability | Typical Applications |
|---|---|---|---|---|---|
| Aluminum 6061 | 2.70 | 310 | Good | Excellent | Structural, Enclosures |
| Aluminum 7075 | 2.81 | 572 | Fair | Good | Aerospace, High-Load |
| Stainless 316L | 8.00 | 485 | Excellent | Good | Medical, Marine |
| Steel 4140 | 7.85 | 655 | Fair | Good | Shafts, Gears |
| Titanium Grade 5 | 4.43 | 950 | Excellent | Fair | Aerospace, Implants |
| PEEK | 1.32 | 100 | Excellent | Good | Medical, Semiconductor |
| POM (Delrin) | 1.41 | 70 | Good | Excellent | Gears, Bushings |
| Nylon PA6 | 1.13 | 85 | Good | Good | Wear Parts, Guides |
| Inconel 718 | 8.19 | 1375 | Excellent | Difficult | Turbine, Chemical |
| Tungsten | 19.30 | 980 | Good | Difficult | Shielding, Furnace |
Not Sure Which Material to Choose?
Our engineers will help you select the right material for your project. Send us your drawings and requirements for a detailed recommendation and FOB/CIF quote within 12 hours.
Three Cooperation Modes
Have Drawings
DFM report → 24h quote → 20-day first sample
Have Samples
48h 3D design → 48h quote
Have Ideas
Technical support → Drawing design → Sample
Don't See Your Industry?
We machine precision parts for any industry. Send us your drawing and requirements.